CHECK IT OUT!!! AN IOT CROP MANAGEMENT AND IRRIGATION SYSTEM REMOTELY MONITORED AND CONTROLLED WITH A SMART PHONE DEVELOPED FROM SCRATCH
The problem with crop monitoring and irrigation is that it is time-consuming and not very accurate. Crop irrigation is not just about watering the plants, but also about maintaining the right moisture level in the soil. Irrigation systems are usually controlled by humans who have to manually turn on and off valves, which can lead to a lot of wasted water.
The development of a smart IoT enable crop monitoring and irrigation system will help solve this problem. The system will be able to monitor plant growth, detect if there's a risk of drought or if the soil has too much water, and automatically irrigate accordingly.
This system can be used by farmers to help them with their crops in an easier way than before, as it will eliminate human error from the equation.
I'm @techlhab and today, I would like to share with you guys one of my recent IoT/Embedded Systems projects which is an IoT crop management and irrigation system I developed using a microcontroller, sensors, relays, etc, and programmed using C++ with Arduino IDE (Integrated Development Environment).
This system is designed to monitor and control the irrigation of a crop with the aim to reduce water usage and increase yield. It consists of sensors, actuators, a microcontroller, and a wireless network that are installed in the system.
The sensors measure moisture content, and soil conductivity. The camera installed in the system helps provide a live stream of the crop or field. The relay controls the irrigation pump according to the sensor readings. The microcontroller collects data from all sensors and uploads them to a server for analysis. The wireless communication between the different components enables remote monitoring of crops from anywhere in the world via an internet connection.
It is a very nice and interesting project and it makes it easy to manage, monitor, and control crops and makes the whole crop management and irrigation process much more easier and efficient.
An application is developed with the system to help easier monitor and control the crops via the internet. This means you can be anywhere in the world and still be able to know the condition of the crop as well as irrigate it properly.
The system has a camera incorporated in it to easily monitor the live appearance of the crop, check for pigmentation and also monitor its surroundings.
- ESP 32 CAM Micro Controller
- Soil Moisture Sensor
- Relay Module
- 5v DC Water Pump
- LED
- Control Switch
- Water Hose
- Vero Board
- 3.7V Rechargeable Lithium Battery
- Lithium Battery Charger Module
- Resistor
- Connecting Wires
- Arduino IDE (Integrated Development Environment)
- Embedded C/C++
- Fritzing
- Connecting the Soil Moisture Sensor to the Esp 32 Cam
| ESP 32 CAM | Soil Moisture Sensor | |
|---|---|---|
| 1 | 5v | Vcc |
| 2 | Gnd | Gnd |
| 3 | D2 | Signal |
- Connecting the Relay Module to the Esp 32 Cam
| Arduino Uno | Relay Module | |
|---|---|---|
| 1 | 5v | Vcc |
| 2 | Gnd | Gnd |
| 3 | D10 | Signal |
Thanks for reading and visiting my blog 🤝. Kindly support this post by reblogging, upvoting, and commenting, it would be highly appreciated.
Images used in this post were all designed by me using frizting, a circuit design and simulation software, and canva.
Posted with STEMGeeks
No source code?
Sure their is @leprechaun. Let me push it to GitHub then I would send u the link to the repository. Or what do u think?
Sounds like a great way to scale up a farm.
Wow that is very creative nice job
!1UP
Thanks @gwajnberg for the nice comments 🤝...
You have received a 1UP from @gwajnberg!
@oneup-curator, @stem-curator, @vyb-curator, @pob-curator, @neoxag-curator, @pal-curator
And they will bring !PIZZA 🍕.
Learn more about our delegation service to earn daily rewards. Join the Cartel on Discord.
I gifted $PIZZA slices here:
@curation-cartel(12/20) tipped @techlhab (x1)
Send $PIZZA tips in Discord via tip.cc!
Thanks for your contribution to the STEMsocial community. Feel free to join us on discord to get to know the rest of us!
Please consider delegating to the @stemsocial account (85% of the curation rewards are returned).
You may also include @stemsocial as a beneficiary of the rewards of this post to get a stronger support.
Congratulations @techlhab! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):
Your next target is to reach 4750 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPCheck out the last post from @hivebuzz:
Support the HiveBuzz project. Vote for our proposal!
Great writeup @techlhab. I've worked with a similar system myself, but found the resistive moisture sensors can corrode and give possible false readings after several months in use. Do you have the same challenges?
Yeah. So intend to change it to the capacitive moisture sensor soon.
Dear @techlhab,
May I ask you to review and support the new proposal (https://peakd.com/me/proposals/240) so I can continue to improve and maintain this service? The proposal support Level is close to 100% and your approval could help it to be funded.
You can support the new proposal (#240) on Peakd, Ecency, Hive.blog or using HiveSigner.
Thank you!