🎄🎅🏻DIY: tutorial for a Mini Christmas Tree 🎅🏻🎄/🎄🎅🏻DIY: tutorial para un Mini Arbolito navideño 🎅🏻🎄
Happy day friends from @Diyhub, I hope you are doing well. Christmas is approaching and it is the best time to get creative and start making ornaments to decorate and give as gifts, here I share the step by step of these cute - and easy to do yourself - little trees🎄🤗
🌟 STEP 1🌟
On a white sheet and with the help of some covers I drew 8 circles from largest to smallest, then with the help of a marker I drew some tips that will help give the tree a nice shape.
🌟 STEP 2🌟
Cut them all out to make them into the molds
🌟 STEP 3🌟
After cutting out the leaf molds, we move on to the foam, mark and cut out
🌟STEP 4🌟
We continue cutting each one, until we have them all ready
🌟STEP 5🌟
In a little piece of anime, cut out a small circle that will be the base of our little Christmas tree 🎄
🌟STEP 6🌟
To not make it so simple, I cut out the measurements of the circle and the edges in foam and covered it by gluing it with liquid silicone.
🌟STEP 7🌟
To have our structure or body of the tree, we cut the 20 cm of wire. We cut out a 2 × 2 cm square in green foam, and we are going to glue it, leaving 2cm uncovered at the beginning of the wire to help us join it to the base.
🌟STEP 8🌟
Then we mark the center of the base, and with the help of silicone we are going to introduce the little wire that was left uncovered to the base
🌟STEP 9🌟
Now the most important thing, the time to assemble. First we place the largest one, and for that we also mark the center of each of the parts
🌟STEP 10🌟
To separate this first layer from the others, between each one, I placed a white pearl and a smaller red one. So successively, we go from the largest until we reach the smallest, remembering to do the division between each one with 2 pearls
🌟STEP 11🌟
To give the final touch to the top of the tree, the famous little star could not be missing. For it, I drew 2 identical stars on the gold foam, cut out and then glued one on one side and one on the other so that the wire at the tip is not visible.
🌟STEP 12🌟
Now is the time to decorate with more beads and try to distribute them on all sides.
.
And ready, this is how we have this beautiful little tree, ideal to decorate a table, take to the work desk or give as a gift 🎄✨.
I took a lot of photos because the tree wanted a lot 🤗, I hope you like it☺️
Feliz día amigos de @Diyhub, espero estén muy bien. Ya se acercan las navidades y es el mejor momento para ponernos creativos y comenzar a hacer adornitos para decorar y regalar, acá les comparto el paso a paso de estos lindos - y fáciles de hacer - arbolitos🎄🤗
🌟foami escarchado verde
🌟 foami dorado
🌟foami blanco
🌟 20 cm de alambre
🌟silicón líquido
🌟perlas pequeñas en color blanco perlado y rojo
🌟tijeras y piqueta
🌟 PASO 1🌟
En una hoja blanca y con ayuda de algunas tapas, dibujé 8 círculos de más grande a más pequeño. Luego, con ayuda de un marcador, les fui dibujando unas puntas que ayudarán a darle forma linda al árbol
🌟 PASO 2🌟
Recorté todos para convertirlos en los moldes
🌟 PASO 3🌟
Luego de recortar los moldes de hoja, pasamos al foami, marcamos y recortamos
🌟PASO 4🌟
Seguimos recortando cada una, hasta tenerlas todas listas
🌟PASO 5🌟
En un pedacito de anime, recorté un círculo pequeño que será la base de nuestro arbolito 🎄
🌟PASO 6🌟
Para no dejarlo tan simple, recorté las medidas del círculo y los bordes en foami y los cubrí pegándolos con silicón líquido
🌟PASO 7🌟
Para tener nuestra estructura o tronco del arbolito, cortamos los 20 cm de alambre. Recortamos un cuadrito de 2 ×2 cm en foami verde, y lo vamos a pegar dejando 2cm sin cubrir en el inicio del alambre para que nos ayude a unir a la base
🌟PASO 8🌟
Luego marcamos el centro de la base, y con ayuda de silicón vamos a introducir a la base el pedacito alambre que quedó sin cubrir.
🌟PASO 9🌟
Ahora sí, lo más importante, el momento de armar. Primero colocamos el más grande, y para eso también marqué el centro de cada una de las partes
🌟PASO 10🌟
Para separar , primera capa de las otras entre cada una fui colocando una perla blanca y una roja de menor tamaño. Así sucesivamente, vamos desde el más grande hasta llegar al más pequeño, recordando hacer entre cada uno la división con las 2 perlitas
🌟PASO 11🌟
Para dar el toque final a la punta del árbol no podía faltar la famosa estrellita. Para ella, dibuje 2 estrellas iguales en el foami dorado, recorté y luego pegue una de un lado y una del otro de manera que no se vea el alambre en la punta
🌟PASO 12🌟
Llegó el momento de decorar con más perlitas y tratamos de distribuirlas por todos lados
Y listo, así nos queda este hermoso arbolito ideal para decorar una mesita, llevar al escritorio del trabajo o darlo de regalito 🎄✨.
Tomé muchas fotitos porque el arbolito quería muchas 🤗, espero les guste☺️
Thank you for visiting my blog and reading this far.
Gracias por visitar mi blog y llegar leyendo hasta acá.
Own photos taken with Tecno Spark 10C phone /Fotos propias tomadas con teléfono Tecno Spark 10C
The text in Spanish was created without AI The text in English I translated with Traductor Google
If you want you can follow me on my social networks😊
Si deseas puedes seguirme en mis redes sociales😊
Wow! The end result is beautiful, I never knew I could make my own Christmas tree with these simple materials, your tutorial is very detailed, thanks for sharing.
!diy
I'm very glad you liked it 😊, yes with a little creativity you can do it and the best thing is that there are few materials and it's very economical 🤗. Thanks for the support ❤️.
It's very beautiful. Your beautiful hands have created the most beautiful things. Thanks for sharing.
Thank you for that nice comment 😊, I'm glad you like it ❤️
You can query your personal balance by
!DIYSTATSThank you very much @glorydee and @diyhub for the gift. I feel very happy in this community... There are still many things I don't understand, but I am open to learning and grateful for the support. Blessings.
Qué trabajo más lindo. Realmente primoroso. Me encantó pasar por tu blog.
Muchas gracias por esas lindas palabras, me alegra mucho que le gustara🎄❤️
Yay! 🤗
Your content has been boosted with Ecency Points, by @niuborges.
Use Ecency daily to boost your growth on platform!
Support Ecency
Vote for new Proposal
Delegate HP and earn more
Thank you very much for the good news 😊. Thank you for the support 🤗
This is creative, beautiful and awesome.
Lovely Christmas tree dear.
I'm glad for your nice comment 😊. Thank you very much ❤️
You are welcome dear
Que bonito arbolito amiga! saludos!
Muchas gracias, me alegra que te guste 🤗🥰. Saludos!
Congratulations @niuborges! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
Your next target is to reach 400 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOP