Diy off houlder blouse made for my self.

Hello hive,

Today I will like to share with you all how i made this beautiful blouse for my self, I can wear it on trouser and I can also wear it on sket.

Material used to sew the top

1 and half yard of lining

2 yard of Ankara fabric
Elastic
Thread
Gum stain

Cutting and sewing stage

Measurement

Burst 37inches

Waist 33inches

Under burst 12inches

Upper burst 35inches
Sleeve 10inches

Cutting stage

I measured the horizontal measurement from shoulder to upper burst is 6 inches from upper burst to under burst is 12 inches, half length is 16inches , blouse length is 23inches at front the back is 20inches, after taking all the horizontal measurement I input the body measurement by dividing it into 4inches 37÷4=9.25 + 2inches sewing allowance, waist 33÷4=8.25.

After taking all the necessary measurement I measured the breast cut from the center of the blouse 4inches down to the waist and measured 2 inches out to get my curve all the way to the nipple point since the blouse is off shoulder I cut out the upper part which is 6 inches then place the front to cut out the back after that I measured 3 inches upward to get curve at the down part of the blouse.

Sleeve

After cutting the sleeve I place the fabric to cut out the lining and the gum stain for the front part then I took it to my sewing machine and join the fabric separately and join the lining separately and iron it .

Sleeve

---

Finishing

---

The blouse was neatly finished and have wore it on trouser and also sket and it look beautiful on me.

Thank u all for viewing my blog I hope this post is helpful I will appreciate your lovely comment.....