I AM SKILLED AT FIXING CHRISTMAS LIGHTS (ENG/ESP)

avatar


IMG-20241106-WA0575.jpg

Hello everyone. I want to thank this lovely community and hope everyone had a good day. Yesterday was a holiday here in Colombia, so to make the most of the day and please my wife, who wanted to set up the Christmas tree, we started by bringing down the boxes with all the Christmas decorations. Among them were the lights for the tree, so I started testing them to see if they worked. I found two strings of lights with loose wires disconnected from their connectors, so I carefully set out to fix them as best I could.

Hola a todos. Quiero agradecer a esta linda comunidad y espero que todos hayan tenido un buen día. Ayer, aquí en Colombia fue feriado, y para aprovechar el día y complacer a mi esposa, que quería armar el árbol de Navidad, comenzamos bajando las cajas con todas las cosas navideñas. Entre ellas, estaban las luces del árbol, así que empecé a probarlas para ver si funcionaban. Encontré dos extensiones de luces que tenían los cables desprendidos de sus conectores y no encendían, por lo cual con mucho cuidado me puse a arreglarlas como pude.
IMG-20241106-WA0591.jpgIMG-20241106-WA0587.jpgIMG-20241106-WA0585.jpg

To attach the wires, I realized I needed to solder them with tin, but I didn't have either tin or a soldering iron to do it. So, I had to get creative. I used a nail, held it with pliers, and heated it on the stove. When the nail was hot enough, I pressed it to the connector where the wire needed to be attached and, using the tin already there, managed to solder the wire back in place. It took a bit of effort, but, thank God, I was able to fix it.

Para pegar los cables, me di cuenta de que necesitaba soldarlos con estaño, pero no tenía ni estaño ni un cautín para hacerlo. Entonces, me las ingenié de otra manera. Utilicé un clavo, lo sujeté con un alicate y lo calenté en la hornilla de la cocina. Cuando el clavo estaba bien caliente, lo apliqué al conector donde debía pegarse el cable y, con el mismo estaño que ya tenía, logré que se soldara el cable de nuevo. Fue un poquito de trabajo, pero, gracias a Dios, logré arreglarlo.
IMG-20241106-WA0594.jpgIMG-20241106-WA0597.jpgIMG-20241106-WA0585.jpg


In the end, my wife was happy because the lights were working well. Friends, this is the end of my post, thank you for reading!

Al final, mi esposa quedó contenta porque las luces funcionaban bien. Amigos, he llegado al final de este post, ¡gracias por leerme!
IMG-20241106-WA0579.jpgIMG-20241106-WA0576.jpgIMG-20241106-WA0580.jpg



IMG-20240922-WA0007.jpg

THANKS TO SEPARATOR AND BANNER/GRACIAS A SEPARADOR Y PANCARTAS

https://peakd.com/hive-148441/@ikasumanera/eng-es-i-made-hive-free-use-art-of-for-all-of-you-part-1-dividers-and-banners-or-hice-arte-de-libre-uso-para-todos-parte-1



0
0
0.000
7 comments
avatar

good on you, mate, hope you can make good bucks with that in the future

0
0
0.000
avatar

Muchas gracias amigo, bendiciones👍🏻

0
0
0.000
avatar

Congratulations @eliroldan! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You received more than 1750 upvotes.
Your next target is to reach 2000 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out our last posts:

Our Hive Power Delegations to the October PUM Winners
Feedback from the November Hive Power Up Day
Hive Power Up Month Challenge - October 2024 Winners List
0
0
0.000
avatar

Amazing work you did there, I'm glad your wife loved your work ☺️

0
0
0.000
avatar

Que bueno, bastante hábil, a veces nos toca hacer esas cosas

0
0
0.000
avatar

La verdad que si, todo con tal de ahorrarnos unos pesos

0
0
0.000