When Worst Comes to Worst its for the Best ? /Reblog Lottery

A few day ago I was printing a sexy scupture, I shared the picture above on X and on inleo threads.

It was a sexy scupture with some wood grain design and I was also priting it out with partialy wood filament, I specifically was looking for something that would look cool with this wood filament, and things looked promising, it was a fairly long print at about 15 hours and unfortunately what you see below is what I came to in the morning.

Not only did the print fail but the printer displayed a fatal error signal,
I quickly determained that the heating element for the hot end crapped out.

Luckily I had the part I needed but I ran into some other issues I was not able to loosen a screw to release this broken heat element.

I did not have much choice so I started to take apart the carriage to try and have better access to this part, I was able to pull it out and realized that the part is not necessarily tottaly lost but brining it back to life would be a challange and luckily I had a whole spare hot end assembly, Just needed to solder on the right connector plugged it in.
I tired to heating and everything seemed to be working fine, success right ? Nope not quite since I was just testing it out without fully assembling the printer.

And so I started trying to put it all back togher and in the process I broke one of the plastic parts, That got me fairly upset I was thinking of how I can fix it now, since now I needed a printer to make the part to replace the broken part with no working printer around.

And so I pulled out my only other printer I havent used for months becouse it was broken, I figured if I can fix this one I can print a part to fix my good printer.

I was able to fix up the mechanical issues with it and then I printed a few test prints and changed the setting to get it to print some reasonble quality before I started to print the part for the other printer.

Right below you can see it working on this part and you may notice another one of my repairs, I had to use some hot glue to attach my broken part fan, and also had to use a heat gun to deform it a little as initialy it was crashing into the prints, this is what I had to do just to make it work but now I can print a new fan for this printer.

Right below is the final part, came out reasonable and hopefuly tomorow I can fix my printer and then I will have 2 working printers, I guess sometimes when worst comes to worst its for the best.

---

Reblog lottery

We got 39 participants for our reblog lottery this time around.

@agreste @bitandi @blitzzzz @bulliontools @caspermoeller89 @daniasi @duckmotor @ecencypoints @esbat @ferod23 @florakese @guurry123 @henruc @hjrrodriguez @jenam @jorgebgt @ladymisa @maddogmike @miriammarga @mirroredspork @monsterbuster @nahueldare3627 @necho41 @olaf.gui @rebe.torres12 @rosauradels @saffisara @scfather @seki1 @servelle @stekene @sylmarill @thebighigg @vaynard86 @vrezion @vrezyy @ydm6669 @youloseagain and @yova

and the winner this time around is....

And it's a dud.

@guurry123 ! Congratulations enjoy your 10% profit share on this post and 5 HBI units , more about HBI here

The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share on my next post and 5 HBI units (bonus wheel)

This is all done automatically and I apply the winner to be a beneficiary for the post.

Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.

---

I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.

@bitcoinman's bits of wisdom

• Invest only what you can afford to lose and be mindful of the potential risks.
• Unless you can accept delivery stay away from futures and stick to physical.
• Leverage is a great tool for losing money fast.
• Numismatics for the lows stick to smart stacking baby.
• Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.

---

You can find out more about the #silvergoldstackers community in the post below

https://hive.blog/hive-136819/@myprecious/official-silvergoldstackers-membership-post-january-24-2024

HOC Hive Onboarding Committee discord link here

Day	Post
Monday	Flexed-up Mondays
Tuesday
Wednesday	Operation HoneyTrail
Thursday
Friday	Stacker of the week
Saturday	Lazy Saturday post
Sunday

Profit share

10% of this post earnings go to @guurry123 for being our reblog lottery winner. 10% goes to the HOC community account

That's it for today's post thanks for stopping by your support is truly appreciated.

Posted Using InLeo Alpha