I Win! /Reblog Lottery DUO BONUS !

avatar
(Edited)

20240704_092800.jpg

How goes everyone in this post I share an update on my 3d printed fender...
I WIN... for now 🤣
11 days ago I shared my story about trying to make a replacement fender in a post here

If you seen that post you may be thinking hey that looks like the one you shared already and you would somewhat be right, it's very similar the difference is the bottom layer is a little thicker.

I think the design that I shared before this one was fine but the screw holes got stripped and they didn't hold it properly, as I rode I had to hold my foot on the fender to prevent it from rubbing on the tire, however when I got home I noticed I snapped it from using my foot.

So I printed another with a slightly thicker bottom and I had to drill out a bigger screw holes and thread them, I also used some hot glue again just to be safe.

And so far it has been holding up pretty well and every time I ride it gives me joy knowing I won, however that is not certain quite yet there are still some challenges my fender needs to pass to be a true win.

For the true win conditions it must be able to not break during the Canadian cold as plastic becomes more brittle when cold and for it to last more than the batteries and that would maybe be another year or so.

11 days ago I mentioned if this fails I would just have to buy a new scooter and I wasn't joking my 3d DIY repair ended up costing me about 200 dollars not counting the time I spend so it's tough calling this an economical fix however it was a challenge and so far I have seem to overcome and that feels good.

20240704_092808.jpg

link to the file if anyone is interested here - https://www.thingiverse.com/thing:6695620

Reblog lottery

We got 31 participants for our reblog lottery this time around.

@blitzzzz @chaosmagic23 @cup-bearer @daniasi @dgi @duckmotor @dynamicgreen @ecencypoints @ekads @ene22 @ferod23 @fonestreet @guurry123 @henruc @hjrrodriguez @juanvegetarian @khantaimur @ladymisa @mirroredspork @monsterbuster @olaf.gui @revolverocelotyt @seki1 @servelle @stekene @sylmarill @trautenberk @tvlipz02 @vaynard86 @ydm6669 and @youloseagain

and the winner this time around is....

Media_240710_224751.gif

Media_240710_224822.gif
So close but it looks like we got a dud, better luck next time !

@sylmarill ! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here
ss.png

The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post

This is all done automatically and I apply the winner to be a beneficiary for the post.

Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.

I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.

@bitcoinman's bits of wisdom

  • Invest only what you can afford to lose and be mindful of the potential risks.
  • Unless you can accept delivery stay away from futures and stick to physical.
  • Leverage is a great tool for losing money fast.
  • Numismatics for the lows stick to smart stacking baby.
  • Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.

hive bullion exhange.jpeg
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES



Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO

You can find out more about the #silvergoldstackers community in this post here

1000029296.jpg

HOC Hive Onboarding Committee discord link here

Weekly Post Schedule

DayPost
MondayArt&3D
Tuesday
Wednesday
Thursday
FridayStacker of the week
SaturdayLazy Saturday post
Sunday

Profit share

10% of this post earnings go to @sylmarill for being our reblog lottery winner.
10% goes to the HOC community account

That's it for today's post thanks for stopping by your support is truly appreciated.

Posted Using InLeo Alpha

pimp alive neoxian hive-engine inleo hive life hivediy hive-140084
0
0
0.000
17 comments
avatar

@bitcoinman, the HiQ Smart Bot has recognized your request (1/3) and will start the voting trail.

In addition, @bitcoinman gets !LOL from @hiq.redaktion.

For further questions, check out https://hiq-hive.com or join our Discord. And don't forget to vote HiQs fucking Witness! 😻

0
0
0.000
Reply
avatar

You received an upvote of 90% from Precious the Silver Mermaid!

Please remember to contribute great content to the #SilverGoldStackers tag to create another Precious Gem.

0
0
0.000
Reply
avatar

Well done! It might ve an expensive fix, but you learn a lot 😆

!hiqvote

0
0
0.000
Reply
avatar

Noice one, @bitcoinman. I'd love to get me one of those 3D printers to use in a few repairs needed around the house.

0
0
0.000
Reply
avatar

I like how you evolve the design of the fender and it becomes better and better.
!BBH

0
0
0.000
Reply
avatar

200 bucks 😂😂😂

How much was the scooter 🛴?😂

0
0
0.000
Reply
avatar

Congratulations @bitcoinman! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You distributed more than 32000 upvotes.
Your next target is to reach 33000 upvotes.
You got more than 22500 replies.
Your next target is to reach 23000 replies.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

0
0
0.000
Reply
avatar

An expensive challenge... But as long as it works and holds together you still come out a winner!
!DOOK

0
0
0.000
Reply